Electricity for HVACR Practice Test

These questions are part of the practice quiz. Start practicing

• How are capacitors connected in a parallel circuit?
• Which of the following is the unit of electrical resistance?
• What is reactive power?
• What type of current flows in one direction only?
• When testing the windings of a single-phase induction motor, the resistance of the start winding will be _____.
• What type of current is typically used in most residential applications?
• How does a multi-meter function?
• A transformer is used to do what?
• What characteristic do devices that use DC instead of AC power often have in common?
• Which of the following describes the characteristics of an electric fan in HVAC applications?
• What is the primary function of a starter in a three-phase motor?
• What kind of protection does a surge protector offer to electrical circuits?
• The effective (rms) voltage of a sine wave with a peak voltage of 200V is what?
• What device can you use to measure voltage in an electrical circuit?
• Central air conditioning systems in homes generally require a power source of ____.
• What type of electrical current is commonly used in HVAC control circuits?
• What is the SI unit of voltage?
• Why is a good fuse reading zero ohms when tested with an ohmmeter?
• How much power is consumed by a 120V parallel circuit that contains a 100 load and an 80 load and draws 2.7A?
• What is the purpose of a relay in an electrical system?
• Which device is commonly used to measure electric current?
• In HVACR terminology, what does AC stand for?
• What is the standard voltage level for residential HVAC systems?
• In a circuit, what does Ohm's law state?
• A device that acts as an electromagnet to open or close a valve is a ______.
• What is an inductive load?
• What type of current flows in one direction only?
• The voltage at the 270-degree point of a sine wave with a maximum voltage of 10V is what value?
• A motor that is designed to start with a capacitor and run with a capacitor is typically known as a ____.
• Which of the following correctly applies to three-phase motors?
• What is commonly used to enhance the starting torque of single-phase motors?
• What type of load is a typical compressor in a refrigeration system considered?
• What is the role of safety switches in electrical systems?
• What is the primary function of a capacitor in an electrical circuit?
• What is the voltage at the 270-degree point of a sine wave with a maximum voltage of 10V?
• The distance an arc can jump between surfaces is a function of the ____.
• Capacitor-start, capacitor-run motors are often favored in HVAC systems primarily for:
• A Legget is used to measure ____.
• The effective (rms) voltage of a sine wave with a peak voltage of 200V is _____.
• A Legget is used to measure what?
• What is the primary function of a centrifugal switch?
• How much power is consumed by a 120V parallel circuit that contains a 100-load and an 80-load that draws 2.7A?
• One milliamperes is equal to _____.
• Which of the following statements about voltage testing is true?
• What is the function of a circuit breaker?
• How can phasing of two transformers in parallel be accomplished?
• What is the primary function of a transformer?
• If a load is supplied by 120V and draws 5A of current, how much power does it consume?
• What is the primary function of a capacitor in a circuit?
• What is defined as an electric current that periodically reverses direction?
• What consequence occurs when placing the jaws of a clamp-on ammeter around two separate conductors?
• What is the electrical unit used to measure resistance?
• What happens to the stator winding of a single-phase motor when voltage is applied?
• What are the two main types of electrical circuits?
• What is electrical impedance?
• What is an example of a series circuit?
• What does AC stand for in electrical terminology?
• What is an advantage of using direct current (DC) in HVAC applications?
• What happens when a fuse blows in a circuit?
• What does an overload relay typically monitor in motor operation?
• What does the synchronous speed of a motor refer to?
• A continuity tester is similar to which type of device?
• What happens to resistance when temperature increases in a conductor?
• Current is measured in ______.
• Why can a run capacitor in a single-phase motor remain connected after the motor starts?
• How do you find the total resistance in a series circuit?
• What kind of electrical circuit allows current to flow in multiple paths?
• In HVAC applications, what is a key advantage of using a three-phase motor over a single-phase motor?
• One milliamperes is equal to _____.
• The minimum approach distance for voltages between 50 and 750V is ___.
• What does the abbreviation HVACR stand for?
• What function does a capacitor serve in HVACR systems?
• When checking a fuse with an ohmmeter, what should be the reading of a good fuse?
• What type of motor has no starting windings and operates based on its design?
• What device is used to measure voltage?
• The use of a capacitor-start, capacitor-run motor typically provides what advantage?
• What device is used for phasing two transformers in parallel?
• How much current is drawn by a 120V circuit containing a 1,500W load?
• Placing the jaws of a clamp-on ammeter around two separate conductors will result in what?
• What is the primary function of an electric fan in HVAC systems?
• What does the abbreviation VFD stand for in HVAC systems?
• When testing the windings of a single-phase induction motor, the resin of the start winding will be _____.
• What is the formula for calculating electrical power?
• Which of these components is considered a load?
• If a load is supplied by 120V and draws 5A of current, how much power does it consume?
• What does the term "phase" refer to in electrical systems?
• The type of single-phase motor most likely to be used to drive a refrigerant compressor is a ____.
• If a circuit containing five 50-ohm resistors has a total resistance of 10 ohms, what type of circuit is it?
• Which law governs circuit behavior in HVACR applications?
• How does the inductive load affect the power factor of a circuit?
• Which device is typically used to convert AC to DC?
• For optimal performance, how should single-phase motor windings be connected for HVAC systems?
• Which of the following components is classified as a load in an electrical circuit?
• What is the unit of measurement for electrical resistance?
• What is the main function of a fuse in an electrical circuit?
• What is the function of a contactor in HVAC systems?
• What is the significance of the phase shift in a shaded-pole motor?
• How is current defined in electrical terms?
• What is the function of a relay in HVAC applications?
• How does an overload relay protect a motor?
• The start winding of a split-phase motor does what?
• If a transformer has 200 windings in its primary and receives 120VAC, how many volts would the secondary with 400 windings produce?
• Central air conditioning systems in homes generally require a power source of ____.
• Which component in HVACR systems is primarily responsible for starting motors?
• What happens to the stator winding of a single-phase motor when voltage is applied?
• In terms of electricity, what does "load" refer to?
• What is the significance of color coding in electrical wiring?
• The minimum approach distance for voltages between 50 and 750V is ___.
• The worst effect a current of 159mA is likely to have on the human body is _____.
• What are the three basic components of a simple electrical circuit?
• How does a three-phase electrical supply benefit HVAC systems?
• What is the function of a circuit breaker in an electrical system?
• How can you detect a short circuit?
• What is the purpose of grounding in electrical systems?
• What type of current flows in one direction only?
• What is the common frequency of AC power in North America?
• What does increasing the voltage do to the current in a circuit, assuming resistance remains constant?
• The voltage at the 90-degree point of a sine wave with a maximum voltage of 10 V is ____.
• In electrical terms, what does an inductor do?
• If a circuit containing five 50 ohm resistors has a total resistance of 10 ohms, the circuit is a:
• A shaded-pole motor is aided in starting by a ____.
• A continuity tester operates like which of the following?
• How does current behave in a parallel circuit?
• In HVAC systems, what is typically the source of electrical energy?
• An increase in voltage will result in which of the following, assuming resistance remains constant?
• How does the secondary voltage of a transformer relate to the number of windings?
• What role does a transformer play in an HVACR circuit?
• What is the main purpose of a transformer?
• In an inductive circuit, what is the relationship between current and voltage?
• What is the role of the dielectric oil in a run capacitor?
• In what scenario would you check for excessive current flow?
• What is the basic definition of voltage?
• What does the term "ground" refer to in electrical systems?
• A motor with a starting torque of 150% is typically designed for which application?
• The purpose of a legend on a circuit diagram is to ____.
• What role does a transformer play in electrical systems?
• A DPDT switch can control how many circuits?
• What is a potential transformer (PT) used for?
• Which type of motor is least likely to find a use in HVAC applications?
• A transformer has 200 windings in its primary, which receives 120VAC. The secondary has 400 windings. The voltage across the secondary is _____.
• The worst effect a current of 159mA is likely to have on the human body is _____.
• What is the voltage at the 90-degree point of a sine wave with a maximum voltage of 10V?
• The distance an arc can jump between surfaces is a function of the ____.
• Which of the following applies to three-phase motors?
• A centrifugal switch is used in a ____.
• When a fuse is checked using a ohmmeter, a good fuse will read ____.
• What device is crucial for protecting circuits from overloads?
• In terms of safety, what is the primary risk of dealing with high-voltage systems?
• A DPDT switch can control _____.
• Which component is essential for protecting electrical equipment from overload?
• What characteristic distinguishes the start winding of a split phase motor?
• What principle does Kirchhoff's circuit law deal with?
• Why can a run capacitor in a single-phased motor remain in the circuit after the motor starts?
• In an inductive circuit, ____.
• What is the main purpose of using surge protectors in electrical circuits?
• The purpose of a legend on a circuit diagram is to ____.
• Current is measured in ______.
• What is the result of connecting multiple resistors in series?
• What characteristic do devices that use DC instead of AC power often have in common?
• What is the primary use of an ammeter?
• A centrifugal switch is used in which type of motor?
• What effect does increasing resistance in a circuit have on current flow?
• In HVACR systems, what is the purpose of the run capacitor?
• What does the abbreviation LED stand for?
• In electrical terms, what does a higher voltage signify?
• The type of single-phase motor most likely to be used to drive a refrigerant compressor is a ____.
• How much current is drawn by a 120V circuit containing a 1,500W load?
• Which of the following statements about voltage testing is true?
• Which electrical component restricts current flow?
• What states the importance of the connection type in three-phase motors?
• What is the unit of measure for electrical power?
• What formula is used to calculate total energy consumption in kilowatt-hours?
• What happens to the current in an inductive circuit compared to the voltage?
• What is a key advantage of using variable-speed motors in HVAC systems?
• Fuses are rated based on ______.
• A device that acts as an electromagnet to open or close a valve is a ______.
• Define inductance in electrical terms.
• Which component is used to store electrical energy in a circuit?
• How do safety switches enhance electrical safety?
• The synchronous speed of a motor is defined as:
• Which law relates voltage, current, and resistance?
• What is the key difference between a single-phase and a three-phase electrical supply?
• What is the unit of measurement for electrical current?
• Fuses are rated based on what factor?